Tables xiii
Tables
TABLE 2-1 NVRAM Parameters Used During POST and Boot Sequence 2-5
TABLE 2-2 Summary of Autoboot and Diagnostic Switch Parameters 2-5
TABLE 2-3 Diagnostic Tools 2-7
TABLE 2-4 On-Board Diagnostics 2-8
TABLE 3-1 Interpreting the Keyboard Diagnostic LEDs 3-2
TABLE 3-2 Listing of POST Tests 3-6
TABLE 4-1 Troubleshooting Tips 4-1
TABLE 4-2 Power Supply Connector Pin Assignments 4-4
TABLE 4-3 Troubleshooting Disk Drive Errors 4-6
TABLE 4-4 Physical Memory Address Ranges for 4-Mbyte and 16-Mbyte SIMMs 4-8
TABLE 4-5 Physical Memory Address Ranges for 1-Mbyte and 2-Mbyte SIMMs 4-9
TABLE 4-6 Determining the Defective DSIMM 4-9
TABLE 5-1 Safety Precautions 5-2
TABLE 9-1 535-Mbyte Conner Drive Configuration Jumpers 9-7
TABLE 9-2 535-Mbyte Seagate Drive Configuration Jumpers 9-9
TABLE 9-3 1.0-Gbyte Seagate Drive Configuration Jumpers 9-11
TABLE 9-4 1.0-Gbyte Conner Drive Configuration Jumpers 9-13
TABLE 10-1 Safety Precautions 10-3
TABLE 10-2 Acronyms for Components of the Main Logic Board 10-7
To Next Page
Loading...
