Chapter 6 Power Off and On 6-5
2. Turn on the power in this sequence:
1. External drive units (if any), starting with the unit that is furthest electrically from
the system unit
2. Monitor (if you turned it off)
3. Desktop SPARCstation system unit
3. Boot the operating system.
The operating system may start to boot automatically, or you may need to enter a
command at the system prompt. What you do next depends on the operating system
software you are using. Consult the documentation supplied with your operating
system for instructions on booting and logging in to your system.
To Next Page
Loading...
Need help?
General
