Note - The Ethernet transceiver is not a part of the workstation. It is connected to
the main Ethernet network cable.
If the Ethernet transceiver LED does not light:
4
The transceiver may be bad.
4
The connection on the Ethernet cable may be bad.
4
The Ethernet cable or transceiver may have a problem such as a bad connection,
shorted center conductor to the shield, or a broken cable segment.
SCSI Termination PTC
The SCSI termination PTC protects an external SCSI device from short circuits or
overcurrent. To determine if the SCSI termination PTC is bad, use a VOM and test
the PTC using an open test for lack of continuity.
Positive Temperature Coefficient Devices 185
To Next Page
Loading...
