CHAPTER 13
Diskette Drive
This chapter explains how to remove and install a diskette drive for the
SPARCstation 10 system.
Caution - The diskette drive contains electronic components that are extremely
sensitive to static electricity. Ordinary amounts of static from your clothes or work
environment can destroy the components.
Wear a grounding strap when handling the drive. Refer to “Attaching the Wrist
Strap” on page 34 in Chapter 4. Do not touch the components or any metal parts.
Tools Needed
To remove and install the diskette drive, you will need the following tools and
materials:
4
Phillips screwdriver (size #2)
4
Wrist strap
4
Antistatic surface
Removing the Diskette Drive
Follow Chapter 4 to power off the system and disconnect the expansion units.
135
To Next Page
Loading...
