CHAPTER 15
Internal Disk Cable
This chapter explains how to remove and install the internal disk cable in a
SPARCstation 10 system.
Tools Needed
To remove and install the internal disk cable, you will need the following tools and
materials:
4
Phillips screwdriver (size #2)
4
Wrist strap
4
Antistatic surface
Removing the Internal Disk Cable
Follow the instructions in Chapter 4 to power off the system and disconnect the
expansion units.
Caution - The hard disk drive contains electronic components that are extremely
sensitive to static electricity. Ordinary amounts of static from your clothes or work
environment can destroy the components.
147
To Next Page
Loading...
