hostname# /usr/sbin/halt ##(for SunOS 5.x or later versions)
syncing file systems .... done
Halted
ok
2. As root, enter/usr/sbin/halt (for SunOS 5.x or later versions). For SunOS
4.1.3, enter/usr/etc/halt
The system syncs and halts the file systems, and then displays the ok prompt.
3. The system automatically enters the Forth Toolkit.
The ok prompt shows that you are in the Forth Toolkit.
For extensive information on tests you can run from the Forth Toolkit see Open Boot
2.0 Command Reference.
22
SPARCstation 10 Service Manual ♦ Revision A, July 1993
To Next Page
Loading...
