viii Sun Fire T2000 Server Service Manual • July 2007
4.2.2 Replacing a Fan 4–4
4.3 Hot-Swapping a Power Supply 4–4
4.3.1 Removing a Power Supply 4–4
4.3.2 Replacing a Power Supply 4–6
4.4 Hot-Swapping the Rear Blower 4–7
4.4.1 Removing the Rear Blower 4–7
4.4.2 Replacing the Rear Blower 4–7
4.5 Hot-Plugging a Hard Drive 4–9
4.5.1 Removing a Hard Drive 4–9
4.5.2 Replacing a Hard Drive 4–10
5. Replacing Cold-Swappable FRUs 5–1
5.1 Common Procedures for Parts Replacement 5–1
5.1.1 Required Tools 5–2
5.1.2 Shutting the System Down 5–2
5.1.3 Extending the Server to the Maintenance Position 5–3
5.1.4 Removing the Server From a Rack 5–4
5.1.5 Disconnecting Power From the Server 5–6
5.1.6 Performing Electrostatic Discharge Prevention Measures 5–6
5.1.7 Removing the Top Cover 5–6
5.1.8 Removing the Front Bezel and Top Front Cover 5–7
5.2 Removing and Replacing FRUs 5–8
5.2.1 Removing PCI-Express and PCI-X Cards 5–9
5.2.2 Replacing PCI Cards 5–11
5.2.3 Removing DIMMs 5–12
5.2.4 Replacing DIMMs 5–14
5.2.5 Removing the System Controller Card 5–17
5.2.6 Replacing the System Controller Card 5–18
5.2.7 Removing the Motherboard Assembly 5–19
To Next Page
Loading...
Need help?
General
