Contents ix
5.2.8 Replacing the Motherboard Assembly 5–23
5.2.9 Removing the Power Distribution Board 5–27
5.2.10 Replacing the Power Distribution Board 5–30
5.2.11 Removing the LED Board 5–32
5.2.12 Replacing the LED Board 5–33
5.2.13 Removing the Fan Power Board 5–34
5.2.14 Replacing the Fan Power Board 5–34
5.2.15 Removing the Front I/O Board 5–35
5.2.16 Replacing the Front I/O Board 5–36
5.2.17 Removing the DVD Drive 5–37
5.2.18 Replacing the DVD Drive 5–37
5.2.19 Removing the SAS Disk Backplane 5–37
5.2.20 Replacing the SAS Disk Backplane 5–38
5.2.21 Removing the Battery on the System Controller 5–40
5.2.22 Replacing the Battery on the System Controller 5–40
5.3 Common Procedures for Finishing Up 5–41
5.3.1 Replacing the Top Front Cover and Front Bezel 5–41
5.3.2 Replacing the Top Cover 5–42
5.3.3 Reinstalling the Server Chassis in the Rack 5–42
5.3.4 Returning the Server to the Normal Rack Position 5–43
5.3.5 Applying Power to the Server 5–45
6. Adding New Components and Devices 6–1
6.1 Adding Hot-Pluggable and Hot-Swappable Devices 6–1
6.1.1 Adding a Hard Drive to the Server 6–1
6.1.2 Adding a USB Device 6–3
6.2 Adding Components Inside the Chassis 6–4
6.2.1 Memory Guidelines 6–4
6.2.2 Adding DIMMs 6–6
To Next Page
Loading...
Need help?
General
