2-120 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
3. Use the showdcl(8) command to confirm the DCL information.
4. Use the showboards(8) command to display XSB status information.
5. Use the moveboard(8) command to move an XSB.
XSCF> showdcl –a
DID LSB XSB Status
01 Powered Off
00 00-0
01 01-1
02 01-2
03 01-3
------------------------------------------
02 Powered Off
00 00-0
07 01-0
08 01-1
09 01-2
10 01-3
XSCF> showboards –va
XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD
---- - -------- ----------- ---- ---- ---- ------- -------- ----
00-0 02(00) Assigned n n n Passed Normal n
01-0 02(07) Assigned n n n Passed Normal n
01-1 SP Available n n n Passed Normal n
01-2 02(09) Assigned n n n Passed Normal n
01-3 02(10) Assigned n n n Passed Normal n
<Example> Delete XSBs and make XSB assignment to new domain.
XSCF> moveboard -c assign -d 1 1-0
XSB#01-0 will be assigned to DomainID 1 immediately. Continue?[y|n]
:y
XSCF>
To Next Page
Loading...
Need help?
General
