Suzuki AN400 - Page 151

Engine Mechanical: 1D-7
14) Loosen the muffler connecting bolt (12) and remove
the exhaust pipe bolts (13).
15) Remove the exhaust pipe/muffler by removing the
muffler mounting bolts.
16) Remove the exhaust pipe gasket.
17) Remove the brake hose clamps and rear brake
caliper from the swingarm.
18) Remove the rear axle nut (14) and collar (15).
19) Remove the swingarm (16).
20) Remove the collar (17) and rear wheel.
21) Support the engine using an engine jack.
22) Remove the cushion rod bolt/nut (18) and engine
mounting bolt/nut (19).
23) Remove the engine from the frame.
13
12
I705H1140184-01
I705H1140185-02
I705H1140186-01
15
14
16
I705H1140187-02
17
I705H1140188-02
I705H1140189-01
18
19
I705H1140190-02