Suzuki AN400 - Brake Control System and Diagnosis; Schematic and Routing Diagram; Front Brake Hose Routing Diagram

4A-1 Brake Control System and Diagnosis:
Brake Control System and Diagnosis
Schematic and Routing Diagram
Front Brake Hose Routing Diagram
B705H14102003
2
2
2
1
1
3
5
5
4
“A”
“A”
“B”
“C”
“a”
“a”
“b”
“B”
“B”
“D”
“E”
I705H1410028-02
1. Rear brake hose “B”: After touching the clamp to the stopper, tighten the clamp bolt.
2. Front brake hose “C”: Insert the clamp to the hole of the front fender fully.
3. Brake hose guide “D”: After touching the brake hose union to the stopper, tighten the union bolt to the
specified torque.
4. Rear brake pipe “E”: Do not bend the brake hose to frame head pipe side.
5. Front brake caliper “a”: 28°
“A”: Fix the brake hose grommet to its hose clamp. “b”: 14°