Suzuki AN400 - Pillion Rider Handle Cover Removal and Installation; Pillion Rider Handle Removal and Installation; Center Frame Cover Removal and Installation; Lower Frame Cover Removal and Installation

9D-19 Exterior Parts:
Pillion Rider Handle Cover Removal and
Installation
B705H19406018
Removal
Open the seat and remove the pillion rider handle cover
(1).
Installation
Install the pillion rider handle cover in the reverse order
of removal.
Pillion Rider Handle Removal and Installation
B705H19406019
Removal
1) Remove the pillion rider handle cover. Refer to
“Pillion Rider Handle Cover Removal and Installation
(Page9D-19)”.
2) Remove the pillion rider handle (1).
Installation
Install the pillion rider handle in the reverse order of
removal.
Center Frame Cover Removal and Installation
B705H19406020
Removal
Pull out the center frame cover (1).
Installation
Install the center frame cover in the reverse order of
removal.
Lower Frame Cover Removal and Installation
B705H19406021
Removal
Pull out the lower frame cover (1).
Installation
Push in the lower frame cover (1).
“A”: Hooked point
1
“A”
I705H1940036-02
1
I705H1940037-01
“A”: Hooked point
“A”: Hooked point
1
“A”“A”
I705H1940058-01
1
“A” “A”
I705H1940038-02