Suzuki AN400 - Front Frame Cover Removal and Installation; Seat Removal and Installation; Center Leg Cover Removal and Installation

9D-17 Exterior Parts:
Front Frame Cover Removal and Installation
B705H19406014
Removal
1) Remove the helmet box front cover. Refer to “Helmet
Box Front Cover Removal and Installation (Page9D-
16)”.
2) Remove the front frame cover (1).
Installation
Install the front frame cover in the reverse order of
removal.
Seat Removal and Installation
B705H19406015
Removal
1) Remove the front frame cover. Refer to “Front Frame
Cover Removal and Installation (Page9D-17)”.
2) Disconnect the helmet box light coupler (1).
3) Disengage the seat damper (2).
4) Remove the seat by removing the nuts (3).
Installation
Install the seat in the reverse order of removal.
Center Leg Cover Removal and Installation
B705H19406016
Removal
1) Remove the front frame cover. Refer to “Front Frame
Cover Removal and Installation (Page9D-17)”.
2) Remove the left and right center leg cover (1).
CAUTION
!
Do not attempt to disconnect the ambient
temperature sensor coupler.
Installation
Install the center leg cover in the reverse order of
removal.
1
I705H1940026-01
1
I705H1940027-01
2
I705H1940028-01
3
3
I705H1940029-02
1
I705H1940057-01