Suzuki AN400 - Special Tools and Equipment; Recommended Service Material; Special Tool; Specifications

Rear Brakes: 4C-10
Specifications
Tightening Torque Specifications
B705H14307001
NOTE
The specified tightening torque is also described in the following.
“Rear Brake Components (Page4C-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Special Tools and Equipment
Recommended Service Material
B705H14308001
NOTE
Required service material is also described in the following.
“Rear Brake Components (Page4C-1)”
Special Tool
B705H14308002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Pad mounting pin 18 1.8 13.0 )(Page4C-3)
Caliper mounting bolt
23 2.3 16.5
)(Page4C-3) /
)(Page4C-4)
Brake hose union bolt 23 2.3 16.5 )(Page4C-4)
Brake-lock housing bolt 22 2.2 16.0 )(Page4C-5)
Brake disc bolt 23 2.3 16.5 )(Page4C-9)
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — )(Page4C-6) / )(Page4C-
7)
Grease SUZUKI Silicone Grease or
equivalent
P/No.: 99000–25100 )(Page4C-6) / )(Page4C-
6) / )(Page4C-7)
Thread lock cement THREAD LOCK CEMENT SUPER
1360 or equivalent
P/No.: 99000–32130 )(Page4C-5) / )(Page4C-
9)
09900–20205 09900–20607
Micrometer (0 – 25 mm) Dial gauge (1/100 mm, 10
mm)
)(Page4C-9) )(Page4C-9)
09900–20701
Magnetic stand
)(Page4C-9)