9B-9 Lighting Systems:
Horn Button Inspection
B705H19206028
Inspect the horn button switch in the following
procedures:
1) Remove the meter panel. Refer to “Meter Panel
Removal and Installation in Section 9D (Page9D-
14)”.
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the horn button for continuity with the tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one. Refer to
“Handlebars Removal and Installation in Section 6B
(Page6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the horn button switch inspection,
reinstall the removed parts.
Rear Brake Light Switch Inspection
B705H19206030
Refer to “Brake Light Switch Inspection in Section 4A
(Page4A-3)”.
Front Brake Light Switch Inspection
B705H19206029
Refer to “Brake Light Switch Inspection in Section 4A
(Page4A-3)”.
Hazard Switch Inspection
B705H19206031
Inspect the hazard switch in the following procedures:
1) Remove the meter panel. Refer to “Meter Panel
Removal and Installation in Section 9D (Page9D-
14)”.
2) Disconnect the right handlebar switch coupler (1)
and (2).
3) Inspect the hazard switch for continuity with the
tester. If any abnormality is found, replace the right
handlebar switch assembly with a new one. Refer to
“Handlebars Removal and Installation in Section 6B
(Page6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the hazard switch inspection, reinstall
the removed parts.
1
I705H1920025-01
Color
Position
PUSH
B/Bl
B/W
I705H1920040-01
Color
Position
ON
B/Y
B/Y
OFF
I705H1920029-02
Color
Position
ON
B/Bl
B/R
OFF
I705H1920030-01
1
2
I705H1920032-01
Color
Position
ON
OFF
B
Gr
P
Lg
Sb
I705H1920041-02
To Next Page
Loading...
