Suzuki AN400 - Specifications; Service Data; Tightening Torque Specifications

2B-9 Front Suspension:
Specifications
Service Data
B705H12207002
Suspension
Unit: mm (in)
Tightening Torque Specifications
B705H12207003
NOTE
The specified tightening torque is also described in the following.
“Front Fork Components (Page2B-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Item Standard Item
Front fork stroke 110 (4.33) —
Front fork spring free length 347.6 (13.69) 340
Front fork oil type G-10 —
Front fork oil capacity (each leg) 301 ml (10.17/10.60 US/lmp oz) —
Front fork oil level
87 (3.43)
(without spring, inner/outer tube fully pressed)
—
Front fork inner tube O.D. 41 (1.61)
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Front fork clamp bolt 23 2.3 16.5 )(Page2B-3)
Front fork cap bolt 45 4.5 32.5 )(Page2B-3)
Cylinder bolt 30 3.0 21.5 )(Page2B-7)