Engine Cooling System: 1F-8
Radiator Cleaning
B705H11606028
Clean the radiator in the following procedures:
1) Remove the radiator. Refer to “Radiator Removal
and Installation (Page1F-7)”.
2) Remove the cooling fan. Refer to “Cooling Fan
Removal and Installation (Page1F-10)”.
3) Inspect the radiator for dirt and other foreign
materials.
4) Clean the radiator using compressed air.
5) Repair any bent or dented fins using a small screw
driver.
6) Reinstall the radiator. Refer to “Radiator Removal
and Installation (Page1F-7)”.
Radiator Hose Inspection
B705H11606029
Inspect the radiator hoses in the following procedures:
1) Remove the left footboard. Refer to “Footboard
Removal and Installation in Section 9D (Page9D-
21)”.
2) Remove the air cleaner box. Refer to “Air Cleaner
Box Removal and Installation in Section 1D
(Page1D-9)”.
3) Remove the radiator mounting bolts. Refer to
“Radiator Removal and Installation (Page1F-7)”.
4) Inspect the radiator hoses for crack or flat and
leakage of hose connection.
If any radiator hose found in a cranked condition or
flattened must be replaced. Refer to “Radiator Hose
Removal and Installation (Page1F-9)”.
If any leakage from the connecting section should be
corrected by proper tightening.
I705H1160009-01
I705H1160010-01
I705H1160011-03
I705H1160012-03
I705H1160013-01
I705H1160014-04
To Next Page
Loading...
