4A-13 Brake Control System and Diagnosis:
Specifications
Service Data
B705H14107002
Brake + Wheel
Unit: mm (in)
Tightening Torque Specifications
B705H14107003
NOTE
The specified tightening torque is also described in the following.
“Front Brake Master Cylinder Components (Page4A-7)”
“Rear Brake Master Cylinder Components (Page4A-11)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0C (Page0C-7)”.
Item Standard Limit
Master cylinder bore
Front &
Rear
12.700 – 12.743 (0.500 – 0.502) —
Master cylinder piston diameter
Front &
Rear
12.657 – 12.684 (0.498 – 0.499) —
Brake fluid type DOT 4 —
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Air bleeder valve (Front brake)
6.0 0.6 4.5
)(Page4A-5) /
)(Page4A-6)
Air bleeder valve (Rear brake)
6.0 0.6 4.5
)(Page4A-5) /
)(Page4A-6)
Master cylinder holder bolt
10 1.0 7.0
)(Page4A-8) /
)(Page4A-12)
Brake hose union bolt
23 2.3 16.5
)(Page4A-9) /
)(Page4A-12)
Brake lever pivot bolt 1.0 0.1 0.72 )(Page4A-10)
Brake lever pivot bolt lock-nut 6.0 0.6 4.5 )(Page4A-10)
To Next Page
Loading...
