9B-5 Lighting Systems:
Rear Reflector / Rear Combination Light /
License Light Removal and Installation
B705H19206017
Rear Reflector
Removal
1) Remove the mat of the helmet box.
2) Remove the reflector nuts (1) and reflector (2).
Installation
Install the rear reflector in the reverse order of removal.
Rear Combination Light
Removal
1) Remove the left and right frame covers. Refer to
“Frame Cover Removal and Installation in Section
9D (Page9D-20)”.
2) Remove the rear combination light.
NOTE
Care should be used not to cause scratch or
damage to the frame cover and rear
combination light.
Installation
Install the rear combination light in the reverse order of
removal.
License Light
Removal
1) Remove the lower frame cover. Refer to “Lower
Frame Cover Removal and Installation in Section 9D
(Page9D-19)”.
2) Remove the license plate light cover (1).
3) Remove the license plate light (2) from the license
plate light cover (3).
Installation
Install the license plate light in the reverse order of
removal.
2
1
I705H1920018-02
I705H1920019-01
1
I705H1920020-01
3
2
I705H1920021-02
To Next Page
Loading...
