Suzuki AN400 - Crankcase Bracket Removal and Installation; Crankcase Bracket Inspection; Air Cleaner Box Removal and Installation

Engine Mechanical: 1D-9
Crankcase bracket Removal and Installation
B705H11406064
Refer to “Crankcase Bracket Removal and Installation in
Section 2C (Page2C-12)”.
Crankcase bracket Inspection
B705H11406065
Refer to “Crankcase Bracket Related Parts Inspection in
Section 2C (Page2C-12)”.
Air Cleaner Box Removal and Installation
B705H11406066
Removal
1) Remove the helmet box front cover. Refer to “Helmet
Box Front Cover Removal and Installation in Section
9D (Page9D-16)”.
2) Remove the frame front cover. Refer to “Front Frame
Cover Removal and Installation in Section 9D
(Page9D-17)”.
3) Remove the left footboard. Refer to “Footboard
Removal and Installation in Section 9D (Page9D-
21)”.
4) Disconnect the PCV hose (1).
5) Remove the wire harness clamp bolt (2).
6) Disconnect the following couplers.
• Injector coupler (3)
• IAP sensor coupler (4)
• ISC valve coupler (5)
• TP sensor coupler (6)
• STP sensor coupler (7)
• STVA coupler (8)
• ECTS-IATS-Ignition coil lead wire coupler (9)
• IAT sensor coupler (10)
7) Remove the air cleaner box cover (11) and air
cleaner element.
8) Remove the air cleaner box outlet tube (12).
1
I705H1140195-01
2
3
4
5
6
I705H1140196-01
7
9
8
I705H1140197-02
10
I705H1140198-01
11
I705H1140199-01
12
I705H1140200-01