Exterior Parts: 9D-20
Frame Cover Removal and Installation
B705H19406022
Removal
1) Remove the front frame cover, center leg covers,
pillion rider handle, center frame cover and lower
frame cover. Refer to “Front Frame Cover Removal
and Installation (Page9D-17)”, “Center Leg Cover
Removal and Installation (Page9D-17)”, “Pillion
Rider Handle Removal and Installation (Page9D-
19)”, “Center Frame Cover Removal and Installation
(Page9D-19)” and “Lower Frame Cover Removal
and Installation (Page9D-19)”.
2) Remove the fasteners and remove the footboard
cover (1). (LH only)
3) Disconnect the rear combination light coupler (2).
4) Remove the license plate light cover (3) and remove
the left and right frame covers along with the rear
combination light assembly.
5) Remove the frame covers (4) from the rear
combination light assembly (5).
Installation
Install the frame covers in the reverse order of removal.
1
I705H1940039-01
I705H1940040-01
2
I705H1940041-01
3
I705H1940042-01
4
5
I705H1940043-02
To Next Page
Loading...
