Suzuki AN400 - Page 44

0B-17 Maintenance and Lubrication:
Chassis Bolt and Nut Inspection
B705H10206022
Tighten chassis bolt and nut
Initially at 1 000 km (600 miles, 2 month) and every 6
000 km (4 000 miles, 12 months) thereafter
Check that all chassis bolts and nuts are tightened to
their specified torque.
1. Handlebar holder clamp bolt
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
2. Handlebar holder set bolt : 23 N⋅m (2.3 kgf-m, 165 lb-ft)
3. Steering stem lock nut : 30 N⋅m (3.0 kgf-m, 21.5 lb-ft)
4. Handlebar clamp bolt
: 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
(a)
1
I705H1020057-03
(b)
2
(c)
3
I705H1020059-01
(d)
4
I705H1020058-06
5. Brake master cylinder mounting bolt
:10 N⋅m (1.0 kgf-m, 7.0 lb-ft)
6. Front fork clamp bolt : 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
7. Front fork cap bolt : 45 N⋅m (4.5 kgf-m, 32.5 lb-ft)
8. Front axle : 65 N⋅m (6.5 kgf-m, 47.0 lb-ft)
9. Front axle pinch bolt : 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
10. Front brake caliper mounting
bolt
:35 N⋅m (3.5 kgf-m, 25.5 lb-ft)
11. Brake caliper air bleeder valve
(Front & Rear)
:6.0 N⋅m (0.6 kgf-m, 4.5 lb-ft)
13. Brake disc bolt (Front & Rear) : 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
(e)
5
I705H1020061-01
(g)
7
(f)
6
I705H1020060-01
(h)
8
(i)
9
(j)
10
(m)
13
(m)
13
(k)
11
I705H1020062-03