ELECTRICAL SYSTEM 10-29
ENGINE OIL LEVEL INDICATOR
• Remove the maintenance lid. (9-13)
• Disconnect the oil level switch lead wire
1.
• Turn the ignition switch to the ON position.
Check if the oil level indicator comes on. If the oil level indicator
does not come on, check the combination meter coupler or
replace the combination meter.
ENGINE OIL LEVEL SWITCH
• Remove the engine oil level switch. (3-12)
Check the continuity between the lead wine and switch body.
The relation between the position of the oil level gauge float in
the oil level gauge and the continuity as shown below.
• Install the oil level switch. (3-74)
SPEEDOMETER
If the speedometer, odometer or trip meter does not function
properly, inspect the speedometer sensor and connection of
coupler. If the speedometer sensor and connection are all right,
replace the meter with a new one.
Switch position Continuity
A ON
B OFF
To Next Page
Loading...
