Engine General Information and Diagnosis: 1A-56
P1750-H (Use of SDS)
Step Action Yes No
1 1) Click the data monitor button (1).
2) Check the manifold absolute pressure 2 data.
Approx. 126 kPa (1.26 kgf/cm
3
, 18 psi) and more OK?
Go to Step 2. Go to Step 4.
2 1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to “Fuel Tank
Removal and Installation in Section 1G (Page 1G-9)”.
3) Check the IAP sensor coupler for loose or poor contacts.
If OK, then check the IAP sensor lead wire continuity.
Go to Step 4. W/Bl wire shorted to
Vcc, or B/Br wire open.
1
I718H1110251-01
I718H1110181-03
I717H1110013-02
To Next Page
Loading...
