Suzuki GSF650A - Horn Removal and Installation (GSF650;S;A; SAK7)

Combination Meter / Fuel Meter / Horn: 9C-12
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation in
Section 6B (Page 6B-3)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Horn Inspection
1) Disconnect the horn couplers (1).
2) Connect a 12 V battery to terminal “A” and terminal
“B”. If the sound is not heard from the horn, replace
the horn with a new one.
3) Connect the horn coupler.
Horn Removal and Installation (GSF650/S/A/
SAK7)
B817H29306018
Removal
1) Disconnect the horn couplers (1).
2) Remove the horn (2) by removing the mounting nut.
Installation
Install the horn in the reverse order of removal.
I718H1930028-03
1
I718H1930030-01
“A”
“B”
I718H1930040-02
1
2
I718H1930031-03