Brake Control System and Diagnosis: 4A-12
Front Brake Master Cylinder Parts Inspection
B817H24106013
Refer to “Front Brake Master Cylinder / Brake Lever
Disassembly and Assembly (Page 4A-10)”.
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
Rear Brake Master Cylinder Components
B817H24106014
I649G1410027-02
I649G1410028-02
1
3
(a)
2,
4
6
(a)
(b)
5
FWD
I649G1410029-06
1. Reservoir tank 4. Master cylinder : 23 N⋅m (2.3 kgf-m, 16.5 lb-ft) : Apply brake fluid.
2. Brake hose union bolt 5. Piston/Cup set : 18 N⋅m (1.8 kgf-m, 13.0 lb-ft) : Do not reuse.
3. Brake hose connector 6. Push rod : Apply silicone grease.