Suzuki GSF650A - Clutch Installation

Clutch: 5C-14
10) Hold the clutch sleeve hub with the special tools.
Special tool
(A): 09920–53740 (Clutch sleeve hub
holder)
(B): 09920–31020 (Extension handle)
11) Remove the clutch sleeve hub nut.
12) Remove the conical spring washer (12), washer (13)
and clutch sleeve hub (14).
13) Remove the thrust washer (15), spacer (16) and
bearing (17).
14) Remove the primary driven gear assembly (18).
NOTE
If it is difficult to remove the primary driven
gear, rotate the crankshaft.
Clutch Installation
B817H25306017
1) Install the primary driven gear assembly (1).
NOTE
• If it is difficult to install the primary driven
gear, rotate the crankshaft.
• Be sure to engage the oil pump drive
sprocket with the primary driven gear.
2) Install the spacers (2) and bearing (3), and apply
engine oil to them.
3) Install the thrust washer (4).
(B)
(A)
I717H1530010-01
12
13
14
I717H1530011-01
15
16
17
18
I717H1530012-01
1
I718H1530043-01
2
3
I717H1530013-01
4
I717H1530014-01