Suzuki GSF650A - Headlight Beam Adjustment (GSX650 FK8)

Lighting Systems: 9B-14
3) Replace the high beam bulb (3).
4) Reinstall the removed parts.
Position Light
1) Remove the combination meter assembly. Refer to
“Combination Meter Removal and Installation
(GSX650FK8) in Section 9C (Page 9C-13)”.
2) Remove the upper panel. Refer to “Exterior Parts
Removal and Installation (GSX650FK8) in Section
9D (Page 9D-14)”.
3) Remove the position light socket (1).
4) Replace the position light bulb (2).
5) Reinstall the removed parts.
Headlight Beam Adjustment (GSX650FK8)
B817H29206027
1) Remove the combination meter assembly. Refer to
“Combination Meter Removal and Installation
(GSX650FK8) in Section 9C (Page 9C-13)”.
2) Insert 8 mm hexagon wrench as shown and adjust
the Low and High headlight beam horizontally.
NOTE
Adjust the beam horizontally first, then
vertically.
Low beam
High beam
3
I817H2920009-01
1
I817H2920010-01
2
I817H2920011-01
“A”: Horizontal adjuster “B”: Vertical adjuster
“C”: Horizontal adjuster “D”: Vertical adjuster
“A”
“B”
I817H2920012-02
“C”
“D”
I817H2920013-02