4E-17 ABS:
ABS Indicator Light Inspection
B817H24504003
Wiring Diagram
Refer to “ABS Unit Diagram (Page 4E-8)”.
Troubleshooting
Step Action Yes No
1 1) Check if the ABS indicator light lights up when turning
the ignition switch ON.
Does the ABS indicator light up?
Go to Step 2. Go to Step 3.
2 (The ABS indicator light lights up)
1) Ride the motorcycle at more than 10 km/h (6.2 mile/h).
Does the ABS indicator light go off?
Normal (No DTC exists) • DTC output (Refer to
“DTC (Diagnostic
Trouble Code) Output
(Page 4E-23)”.)
• If DTC can not be
output (the ABS
indicator light does
not flash), go to Step
7.
FI
I718H1450122-04
I717H2450014-01
To Next Page
Loading...
