Suzuki GSF650A - Page 602

5C-15 Clutch:
4) Install the clutch sleeve hub (5), washer (6) and
spring washer (7)
NOTE
The conical curve side of spring washer (7)
faces outside.
5) Hold the clutch sleeve hub with the special tool.
Special tool
(A): 09920–53740 (Clutch sleeve hub
holder)
(B): 09920–31020 (Extension handle)
6) Tighten the clutch sleeve hub nut to the specified
torque.
Tightening torque
Clutch sleeve hub nut (a): 150 N·m (15.0 kgf-m,
108.5 lbf-ft)
7) Lock the clutch sleeve hub nut with a center punch.
8) Install the clutch push rod (8) into the countershaft.
9) Install the clutch push piece (9), bearing (10) and
thrust washer (11) to the countershaft.
NOTE
Thrust washer (11) is located between the
pressure plate and bearing (10).
5
6
7
I717H1530015-01
6
7
I718H1530068-02
(A)
(a)
I717H1530016-01
I717H1530017-01
8
I717H1530018-01
9
11
10
I717H1530019-01