Engine General Information and Diagnosis: 1A-66
P0110-L (Use of SDS)
Step Action Yes No
1 1) Click the data monitor button (1).
2) Check the intake air temperature data.
Approx. 125
°
C (257
°
F) and more OK?
Go to Step 2. Go to Step 3.
2 1) Turn the ignition switch OFF.
2) Check the IAT sensor coupler for loose or poor contacts.
If OK, then check the IAT sensor lead wire continuity.
Go to Step 3. • Dg wire shorted to
the ground.
• If wire is OK, go to
Step 3.
1
I718H1110251-01
I717H1110020-01
I717H1110013-02
To Next Page
Loading...
