Engine Mechanical: 1D-17
4) Set up the SDS tool. (Refer to the SDS operation manual for further details.)
5) Start the engine.
6) Click “Data monitor”.
7) Warm up the engine (Water temp. more than 80 °C (176 °F)).
8) Click “Active control”.
9) Click “ISC air volume control” (2).
10) Click “ON” button to fix the ISC air volume among 4 cylinders.
NOTE
When making this synchronization, be sure that the water temperature is within 80 – 100 °C (176 – 212
°F).
I717H1140034-01
2
I718H1140351-01
“A”
“B”
I717H1140035-01
“A”: Engine speed: Approx. 1 200 rpm “B”: ISC valve position: Approx. 72 step
To Next Page
Loading...
