2D-5 Wheels and Tires:
2) Install the front wheel with the front axle and tighten
the front axle temporarily.
WARNING
!
The directional arrow on the tire should point
to the wheel rotation, when remounting the
wheel.
3) Tighten the brake caliper mounting bolts (1) to the
specified torque.
WARNING
!
After remounting the brake calipers, pump
the brake lever until the pistons push the pad
correctly.
Tightening torque
Front brake caliper mounting bolt (a): 23 N·m (
2.3 kgf-m, 16.5 lbf-ft)
4) Tighten the front axle (2) to the specified torque.
Special tool
: 09944–28320 (Hexagon socket (19 mm))
Tightening torque
Front axle (b): 100 N·m (10.0 kgf-m, 72.5 lbf-ft)
5) Move the front fork up and down 4 or 5 times.
6) Tighten axle pinch bolt (3) to the specified torque.
Tightening torque
Front axle pinch bolt (c): 23 N·m (2.3 kgf-m, 16.5
lbf-ft)
I717H1240008-01
(a)
1
(a)
1
I717H1240009-01
(b)
2
I717H1240010-01
I717H1240011-01
(c)
3
I717H1240013-01
To Next Page
Loading...
