4E-41 ABS:
2 1) Inspect the clearance between the rear wheel speed
sensor and sensor rotor using the thickness gauge.
Special tool
(A): 09900–20803 (Thickness gauge)
(B): 09900–20806 (Thickness gauge)
Wheel speed sensor – sensor rotor clearance
0.3 – 1.5 mm (0.012 – 0.059 in)
Is the clearance OK?
Go to Step 3. Adjust the clearance.
3 1) Check that the rear wheel speed sensor is mounted
securely.
Is the sensor mounted securely?
Replace the ABS
control unit/HU.
Tighten the mounting
bolts or replace the
bracket if necessary.
Step Action Yes No
(A), (B)
I717H2450011-01
I717H2450017-01
To Next Page
Loading...
