Maintenance and Lubrication: 0B-22
Chassis Bolt and Nut Inspection
B817H20206023
Tighten chassis bolt and nut
Initially at 1 000 km (600 miles, 2 months) and every
6 000 km (4 000 miles, 12 months) thereafter.
Check that all chassis bolts and nuts are tightened to
their specified torque.
1 Frame down tube 50 N⋅m (5.0 kgf-m, 36.0 lb-ft)
2 Steering stem head nut 65 N⋅m (6.5 kgf-m, 47.0 lb-ft)
3 Handlebar holder bolt 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
4 Front fork upper clamp bolt 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
5 Handlebar holder set nut 45 N⋅m (4.5 kgf-m, 32.5 lb-ft)
(a)
1
(a)
1
(a)
1
I717H1020029-01
(c)
3
(c)
3
(b)
2
I717H1020030-01
(c)
4
(d)
5
I717H1020031-02
6 Front brake master cylinder mounting bolt 10 N⋅m
(1.0 kgf-m, 7.0 lb-ft)
7 Brake hose union bolt 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
8 Rear shock absorber mounting nut (Upper) 50 N⋅m (5.0 kgf-m,
36.0 lb-ft)
9 Cushion rod mounting nut 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
10 Rear shock absorber mounting nut (Lower) 50 N⋅m (5.0 kgf-m,
36.0 lb-ft)
11 Cushion lever mounting nut 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
12 Cushion rod mounting nut 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
(e)
6
(c)
7
I717H1020032-01
(a)
8
(f)
9
I717H1020033-02
(f)
11
(f)
12
10
(a)
I717H1020034-01
To Next Page
Loading...
