5B-4 Manual Transmission:
Countershaft Assembly
1) Remove the bearing retainer (1).
2) By using suitable size bolts (2), pull out the
countershaft assembly (3).
Bearing / Oil Seal
1) Remove the oil seal retainer (1) and oil seal (2).
2) Remove the countershaft bearing (3) with the special
tool.
Special tool
(A): 09913–70210 (Bearing installer set)
3) Remove the snap ring (4).
Special tool
: 09900–06108 (Snap ring pliers)
4) Remove the gearshift cam bearing (5) with the
special tools.
Special tool
(B): 09923–74511 (Bearing remover)
(C): 09930–30104 (Rotor remover sliding
shaft)
1
I718H1520010-01
2
2
3
I718H1520011-01
1
2
I718H1520012-01
(A)
3
I718H1520013-01
4
I718H1520014-01
(B)
(C)
5
I718H1520015-01
To Next Page
Loading...
