Suzuki GSF650A - Page 644

9B-3 Lighting Systems:
2) Disconnect the headlight coupler (1) and position
light coupler (2).
3) Remove the position light socket (3) and replace the
position light bulb.
4) Remove the bulb socket rubber cap (4).
5) Replace the headlight bulb (6) by unhooking the bulb
holder spring (5).
6) Reassemble the headlight.
7) Install the headlight assembly so that the hook “A” on
the headlight bezel engages with “B” of the housing.
GSF650S/SAK7
1) Remove the combination meter assembly. Refer to
“Combination Meter Removal and Installation
(GSF650/S/A/SAK7) in Section 9C (Page 9C-5)”.
2) Remove the position light sockets (1) and replace
the position light bulbs.
3) Disconnect the headlight (Low beam) coupler (2)
and remove the bulb socket rubber cap (3).
1
2
I718H1920014-01
4
3
I718H1920015-01
6
5
I718H1920016-01
“A”
“B”
I718H1920017-03
1
I718H1920009-01
3
2
I718H1920010-02