Exterior Parts: 9D-9
3) Remove the front seat from the rear seat.
4) Adjust the seat height adjuster position “A” or “B”.
5) Reinstall the front seat and adjust the seat height
adjuster position “A” or “B”.
6) Install the seat height adjust dampers.
NOTE
Dampers are used in two ways “A” or “B”.
Pay attention to the direction of dampers
when installing them.
CAUTION
!
Position of adjuster and direction of dampers
must be unified either “A” or “B”.
7) Reinstall the seat assembly. Refer to “Exterior Parts
Removal and Installation (GSF650/S/A/SAK7)
(Page 9D-6)”.
“A”: For low (Normal) position “B”: For high position
“A”: For low (Normal) position “B”: For high position
I718H1940021-02
“A”
“B”
I718H1940022-01
“B”
“A”
I718H1940023-01
“A”: For low (Normal) position
“B”: For high position
“A”
I718H1940024-01
“B”
I718H1940025-01
To Next Page
Loading...
