FRONT FORK AND STEERING 18-17
• Tighten the center bolt B to the specified torque.
Center bolt: 69 N·m (6.9 kgf-m, 50.0 lbf-ft)
• Loosen and remove the fork cap bolt 9 (sub-tank) from the
outer tube with the special tool and slowly slide down the
outer tube.
09941-53630: Front fork cap socket wrench (50 mm)
• Pour the specified amount of fork oil into the outer tube.
Oil quantity (When standard fork spring is used):
375 ml (12.68/13.20 US/lmp oz)
99000-99001-SS5: SUZUKI FORK OIL SS-05
or equivalent
• Raise the outer tube and temporarily tighten the fork cap bolt
9 (sub-tank) with the special tool.
09941-53630: Front fork cap socket wrench (50 mm)
To Next Page
Loading...
