CLD window displays list of stations running in the CLD mode along with the current state of each
station. The progress bar indicates activity of the CLD mode.
Configuration
To configure Continuous Logger Download session settings, click
Options button. Continuous logger download options window will
appear allowing you to make necessary adjustments.
Options button is only active when CLD is not running.
Download step determines how often data from SV 200A will be downloaded to the PC.
File saving settings enable configuring basic settings for files download such as download path, file
naming rules and writing session log.
Daily data settings enable configuring the path where files downloaded from the instrument will be
copied after each day of measurements. Files may be automatically merged, if more than one file is
generated throughout the day.
Archivisation settings enable configuring the path where all downloaded files are copied for
archivisation purposes. Files may be compressed into monthly zip file.
The System validation & summary section enables configuring the following settings:
• time of station summary (hourly, daily, weekly or monthly)
• clearing downloaded loggers from the instrument during measurements
• system checks with built-in electrostatic actuator,
• automatic synchronization of real time clock,
• verification of instrument settings during station summary.
The Publish WWW/SVN Upload section enables configuring basic
settings for HTML publishing of the results and FTP uploads. Detailed
settings can be configured for each individual station by clicking WWW
button which becomes visible in the station list.
To Next Page
Loading...
Need help?
General
