If different daylight-saving time rules should be applied,
select Custom and fill in Custom Daylight Saving Time
section.
Note: There are four time-synchronization servers predefined in Time synchronization
settings. Do not change these settings unless the servers are unavailable in the
instrument’s network or a custom server is needed.
9.8.11 Calibration & System Check
SV 200A is fitted with an Automatic calibration and Automatic system check features. The
Calibration & System Check section enables configuring these features.
Automatic calibration
When the Automatic calibration is enabled, mounting on the instrument’s microphone and switching
on the sound calibrator automatically starts the calibration procedure.
Such operation requires typing the Calibration Level from the calibration certificate of the used
calibrator. For more information about the automatic calibration feature see Chapter 4.2.
Note: Defined Calibration Level remains constant. Remember to perform calibration with
the sound calibrator generating the same level as the configured calibration level.
To Next Page
Loading...
Need help?
General
