9.9.3 SVAN Files
SVAN Files is the simplest data collecting mode available in the RC module. This mode is suitable for
browsing the contents of the SV 200A SD-card (including working directory), downloading or deleting
files, changing the working directory of the instrument (see Chapter 9.7) and WEB interface files update.
Note: More information on SVAN Files can be found in SvanPC++ User Manual available
online: http://svantek.com/lang-en/support/19/svanpc_software.html#PDF.
Browsing the contents of the device
SVAN Files window contains two main panes. The left pane displays contents of the instrument’s
memory. The right pane is used to browse local PC files.
Source selector enables the user to change source of files to display in the instrument navigation pane.
In case of SV 200A there are two sources available: SD disk and Internal RAM. No measurement data
can be stored in the Internal RAM memory of the instrument.
Note: Choosing Internal RAM data source enables accessing the settings file with Setup
file editor button. The file contains current detailed setup of the instrument and should not
be modified unless necessary.
By default, SD-card contains following directories:
• ARCHIVE, where old measurement files can
be stored,
• DATA, which is default working directory of the
instrument,
• FIRMWARE, which contains firmware
packages uploaded via WEB interface,
• SETUP, which contains setup files created by
users.
To Next Page
Loading...
Need help?
General
