Svantek SV 200A - SV 200 A System Check

53
SV 200A User Manual
7.2 SV 200A SYSTEM CHECK
Click on the button if you wish to
perform the System check.
The System Check pop-up window with the current SPL
result will appear.
Press Start button and SV 200A will pause the running
measurement, switch on the electrostatic actuator,
measure its level and display it in the System Check
pop-up window.
After finishing system checking the current SPL result will
be displayed in the System Check pop-up window with
the message “System Check Successful”.
7.3 ICONS OF SVANNET APP
Other functions of SVANNET APP relate to icons-buttons, located in the upper line of the window.
- returning to the main screen
- opening the SvanPC++ program
- opening the SvanNET web-service