LAN / WLAN Modem configuration
Configuration of the WLAN/LAN module should start from
selection of the Interface type:
• Disabled means that WLAN/LAN module is switched
off.
• Wired means that SV 200A should be connected to the
Local Area Network (LAN) via the SP 200 adapter,
connected to the LAN socket.
• Wireless Infrastructure means that SV 200A should
be connected to the existing wireless network.
• Wireless Access point means that SV 200A should
work as a wireless router.
Typical Wireless Infrastructure configuration for
connection with the SvanNET web-service is presented
right-hand.
Other settings are dedicated to the specific user needs and
should be configured by local IT specialist.
Network (SSID), Security and Password positions should
be configured based on used wireless network specific
parameters.
9.8.10 Time synchronization
SV 200A offers sophisticated time synchronization features, including automatic and manual daylight-
saving time adjustments.
In the Time zone settings section you can select suitable
Time zone and Daylight Saving Time Standard.
European and US/Canadian standards are implemented
in the instrument.
Custom daylight saving
time setting
To Next Page
Loading...
Need help?
General
