5. After finishing configuration, you can exit
the wizard or add another instrument.
9.3.1 Connections via 3G modem
As was said above the Remote Connection using SvanNET mode is the simplest way to install
wireless communication. All other modes require more efforts and are not recommended by the
producer. If you wish to use other modes, you must refer to the SvanPC++ User Manual for details.
You can enter Station name and Station description for easy instrument identification after the wizard
is finished. APN is mandatory field required to set up the connection. APN value is specific for each
mobile operator, who should deliver such information.
After filling in the required fields in the Remote Connection Wizard, press the Next>> button and enter
the login and the password of your registered account.
Press the OK button and SvanPC++ will run connection settings (step 4 of above procedure).
To Next Page
Loading...
Need help?
General
