Svantek SV 200A - Logger Settings Configuration

90
SV 200A User Manual
Weighting filter
• Z class 1 according to IEC 61672-1:2013,
• A class 1 according to IEC 61672-1:2013 and
IEC 651,
• C class 1 according to IEC 61672-1:2013 and
IEC 651,
• B class 1 according to IEC 651.
RMS detector
The following RMS detectors are available in the instrument:
Impulse, Fast and Slow.
9.8.4 Logger settings
This tab enables setting the logger function, e.g. recording of the time history of measured results, and
consists of the following parameters: time history activation (Logger On), time history step
(Logger step), activation of recording of parameters taken from meteorological station (Logger meteo),
splitting of logger records (Splitting Mode) and logged results selection.
Detector & filter settings
Spectrum filter setting