Svantek SV 200A User Manual

64
SV 200A User Manual
Note: Spectra can only be displayed, when the Octave 1/1 or Octave 1/3 measurement
functions has been selected in the Configuration → Measurement setup tab.
8.3 STATUS VIEW
If you click on the STATUS button being in the WEB INTERFACE mode, you will shift to the Status
view which is similar to the above (see Chapter 8.1.1).
Difference is that instead Alarm setting in this view you can start/stop measurements and the actuator
for system checks.
1
2

Svantek SV 200A Specifications

General

Brand	Svantek
Model	SV 200A
Category	Measuring Instruments
Language	English