The blue STATION LIST button just informs you that you are in
the Station view.
You can set the new station name instead of the default clicking
.
The WEB INTERFACE button switches you to the Live data
view (see Chapter 8.2) in which you can view measurement
results and use additional tools to configure station parameters,
download data files, start/stop measurements and perform
station checking. This button is available for the stations
connected to SvanNET.
The STATUS button switches you to the Station status view
(see Chapter 8.1.1) in which you can check the station status
and configure status alarms.
The STATUS LOG button switches you to the Status log view
(see Chapter 8.1.2) in which you can check the power source
(type and charge level), memory free space, GSM signal quality
and history of system checking.
The CONNECTION LOG button switches you to the Connection log view (see Chapter 8.1.2) in which
you can check the history of station connections.
The DATA TRANSFER LOG button switches you to the Data transfer log view (see Chapter 8.1.2) in
which you can check the history of data transfers (uploads).
8.1.1 STATUS view
In the STATUS view you can check the station status (firmware version, battery charging, memory etc.),
its connection status and configure stations alarms.
• To update instrument’s status, click the UPDATE STATUS button.
• To configure status alarms Conditions and related Actions for the measurement points, click the
STATIONS ALARMS button.
To Next Page
Loading...
Need help?
General
