In the AUXILIARY SETTINGS tab, you can:
1. enter Station description: Station name, Project name and Location name,
2. enter the instrument’s geographical location in Latitude and Longitude coordinates (if GPS is
switched on),
3. select the External device: weather station (Meteo-SP 275), GPS or User interface.
8.4.2 FIRMWARE UPGRADE tab
In the FIRMWARE UPGRADE tab, you can upload new firmware on the instrument’s SD card and
perform upgrade process remotely.
Complete upgrade process is described in detail in Chapter 11.2. Before upgrading it is essential that
the proper firmware file is downloaded from SVANTEK website.
To Next Page
Loading...
Need help?
General
