4. To load firmware, click the Browse button and locate firmware *.bin file on the PC.
5. Upload the selected file by clicking the Upload button.
6. After the upload is finished select new firmware package in the firmware selector.
7. Click the Load firmware button.
8. Click the Restart instrument button to finalize the process and wait 60 seconds for the
connection to renew. The measurements will start automatically.
Note: Downloading of new firmware does not erase communication settings such as APN,
SSID, password, etc. Other measurement settings like measurement function, integration
time, filters, detectors in profiles etc. are set to default values.
To Next Page
Loading...
Need help?
General
